Fixings & Fasteners
Toplam sonuç: 715
M22-XE5
Fixing plate for M22-H... shrouds
Length: 12 mm Width: 55 mm Height: 164 mm Weight: 0.054 Kg
M22-A4
Fixing adaptor, 4-mod, flush mtg
Length: 0.001 mm Width: 0.001 mm Height: 0.001 mm Weight: 0.007 Kg
540902
Mounting set for positioning tensioning straps for Ex pipe clamps
Mounting set for positioning tensioning straps for Ex pipe clamps
107491
Four-legged stand hinged w. half shell f.D40/50mm radius 1330mm angle 10°...
Four-legged stand (hinged design) for supporting tubes D 50 mm with side outlet or air-termination rod D 40 mm with...
107490
Four-legged stand hinged w. half shell f. D40/50mm radius 680mm angle 10°...
Four-legged stand (hinged design) for supporting tubes D 50 mm with side outlet or air-termination rod D 40 mm with...
107391
Tripod hinged w. half shell f. tube D40/50mm radius 1330mm angle 10° StSt
Tripod (hinged design) for supporting tubes D 50 mm with side outlet or air-termination rod D 40 mm with reduction...
107390
Tripod hinged w. half shell f. tube D40/50mm radius 680mm inclination angle...
Tripod (hinged design) for supporting tubes D 50 mm with side outlet or air-termination rod D 40 mm with reduction...
107496
SET of base support rods 4x 16x200 mm StSt for four-legged stand
Set of base support rods for four-legged stand consisting of four rods, 16 mm diameter, 200 mm length.
107396
SET of base support rods 3x 16x200 mm StSt for tripod
Set of base support rods for tripod consisting of three rods, 16 mm diameter, 200 mm length.
107399
Adapter set reduces D 50 mm to D 40 mm for tripod and four-legged stand
Adapter set for tripods and four-legged stands for reducing the diameter from 50 mm to 40 mm.
766396
Adapter with gear coupling and T pin shaft
Adapter (T pin shaft / gear coupling). For insulating sticks with cone coupling for T pin shafts (bayonet locking...
490022
Cleat Al for Rd16 distance of bores 38 mm, 2xM6
Two-screw clamp with M6 thread, for combination with e.g. number plates.
490021
Support StSt for VDB test badge
Carrier plate for fixing the test badge on the down conductor or earth entry rod. Type for round and flat conductors.
490020
Combined cross recessed screw StSt, M6x16
M6 x 16 mm combination head screw for fixing the number plate on the saddle clamp.
490009
Number insert "9", StSt
Embossed number inset (9) for slotting into the number plate (Part No. 490 100, 490 110, 490 116) without tools.
490008
Number insert "8", StSt
Embossed number inset (8) for slotting into the number plate (Part No. 490 100, 490 110, 490 116) without tools.
490007
Number insert "7", StSt
Embossed number inset (7) for slotting into the number plate (Part No. 490 100, 490 110, 490 116) without tools.
490006
Number insert "6", StST
Embossed number inset (6) for slotting into the number plate (Part No. 490 100, 490 110, 490 116) without tools.
528610
Blind rivet D 5mm L 10mm Al/V2A (similar to DIN 7337 (EN 15979))
Blind rivet with StSt pin according to DIN EN 62305-3 Suppl. 1, for connecting bridging brackets, braids or cables.
106314
90° angled fixing plate StSt 110x60x30mm f. DEHNgate
Suitable for installating a DEHNgate arrester (Part Nos. 929 043 – 929 045), anti-rotation borehole (Ø16 mm).